Stampin’ Up! Regal Flora Hugs Card

Good Morning! I’ve used the pretty Stampin’ Up! Regal Flora bundle with the Regal Winter designer series paper for a simple hugs card You can find the currently available supplies I used along with card stock cuts at the bottom of my post.

I cut a Petal Pink card stock panel with the large postage die from the Perennial Postage dies and adhered a panel of Regal Winter DSP to the center. I was pleased at how well the the Petal Pink coordinates with the DSP! I popped the layered die cut on the front of a Blackberry Bliss card base with dimensionals.

I stamped the sentiment from the Stampin’ Up! Regal Flora stamp set using Blackberry Bliss ink on a Very Vanilla panel and cut it out with the pretty label die. I adhered the outer outline die to the card with dots of liquid glue and popped the center on using dimensionals, lining up the bottom right corners.

I made a Blackberry Bliss bow and adhered it to the top right and finished with three Blackberry Bliss foil gems.

For the inside of the card, I stamped the sprig from the Stampin’ Up! Regal Flora stamp set using Bubble Bath ink in the corner of a Very Vanilla panel. I used my Blue and Fresh Freesia colored pencils to outline and accent the leaves and dotted the berries on the twigs with the Real Red colored pencil. This tied the sprig colors nicely to the DSP! I trimmed the side with DSP and adhered the panel to the inside of the card with Stampin’ Seal.

The Stampin’ Up! Regal Flora bundle is really pretty and the Regal Winter DSP is too. It’s a perfect set for making cards for different occasions during the cold winter months. These products are on the Last Chance list, and are only available while supplies last.


Last Chance Products Now Available!

Retiring products for the current September-December 2024 Mini Catalog are now available in the Last Chance Products category in the Online Store.

Stampin’ Up! is making some changes to their product retirement process. They are introducing a new Last Chance Products category in the Online Store today that will include retiring products from the current 2024 September-December Mini Catalog and Online Exclusives items that are being discontinued. The Last Chance Products category is replacing the current Clearance Rack and will be updated every two months.

Here are the details:

  • Last Chance Products include retiring products from both catalogs and online releases, excluding Paper Pumpkin.
  • Last Chance Products are available while supplies last and will be discontinued when they sell out. Items will be automatically removed from the category and the online store when they are discontinued.
  • Discounts vary and are subject to change. Also, depending on inventory, these products may or may not have discounts.
  • The Last Chance Products category will be updated every other month. Updates happen at the beginning of the month and may include additional products in the category and any adjustments to product discounts.

This change aligns with Stampin’ Up!’s product release strategy of new Online Exclusives every two months and unifies the retirement process for Online Exclusive and Catalog products. The goal is to keep product offerings fresh, trendy and exciting for Stampin’ Up! customers.

If you have any questions, let me know.


Current Host Code: VT29C2UC

Use this host code when you order $50 or more and receive a Thank You gift from me!  The free gift is your choice of any item currently available valued up to $10.00.

If your order is over $150, please do not use the host code since you’ll receive your own Host Dollars plus I’ll still send you the Thank You gift!  This host code can be used by anyone, no club or commitment required. Let me know if you have any questions.


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now Button on the right side of the screen to go directly to my Online store or contact me if you have any questions.  Happy Stamping!

Thanks for stopping by and have a great day!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! Last Chance items here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my online frequent shopper customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Blackberry Bliss – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
  • Petal Pink – 4″ x 5-1/4″ (die cut mat)
  • Very Vanilla – 3-3/4″ x 5″ (inside panel), 2-1/2″ x 4″ (label)
  • Regal Winter DSP – 3-1/2″ x 4-3/4″ (front background), 3/4″ x 3-3/4″ (inside trim)

Stampin’ Up! products used in this project:


Stampin’ Up! Iconic Imagery Peace Card for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! The Sentimental Christmas designer series paper pack is full of pretty, nostalgic Christmas images and I paired it with sentiments from the Stampin’ Up! Iconic Imagery card for a holiday card. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a color challenge this week that fits the Sentimental Christmas DSP pretty well:

I adhered a panel of striped Sentimental Christmas designer series paper to the front of a Pretty Peacock card base with liquid glue and then adhered another tree filled panel on top. I cut a panel with a sweet fawn with a Stylish Shapes circle die and adhered it to a Poppy Parade mat cut with a Spotlight On Nature die. I adhered the layered circle to the card with dimensionals.

I used the Winterly Treetops pine sprigs dies to cut Old Olive and adhered them together. I used the Stampin’ Up! Iconic Imagery berry dies to cut Poppy Parade card stock and adhered the berries to the pine sprigs. I cut a Shaded Spruce panel with the leafy sprig from the Sentimental Wishes dies and adhered the die cut greenery to the bottom of the circle on the card.

I stamped the sentiment from the Stampin’ Up! Iconic Imagery stamp set using Poppy Parade ink on Basic Beige and cut it out with the coordinating small label die. I folded a short length of Shaded Spruce ribbon and adhered it to the back of the label and adhered the label to the card with dimensionals.

For the inside panel, I stamped sentiments from the Stampin’ Up! Iconic Imagery stamp set using Poppy Parade ink on Basic White. I fussy cut some birds and greenery and adhered them to the top corner and trimmed the side with DSP. I adhered the panel to the inside of the card with Stampin’ Seal.

The sentiments images from the Stampin’ Up! Iconic Imagery bundle coordinate nicely with lots of different styles. It’s nice to be able to combine elements from different stamps and dies for your projects.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Karen Ksenzakovic has created.

If you get lost along the way, here are the participants for the hop:


Current Host Code: VT29C2UC

Use this host code when you order $50 or more and receive a free gift from me!  The free gift is your choice of any item currently available valued up to $10.00!

If your order is over $150, please do not use the host code since you’ll receive your own Host Dollars plus I’ll still send you the free gift!  This host code can be used by anyone, no club or commitment required. Let me know if you have any questions.


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions. 

Thanks for stopping by and Happy Stamping!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! Last Chance items here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my online frequent shopper customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Pretty Peacock – 4-1/4″ x 11″ card base, scored at 5-1/2″
  • Poppy Parade – 3″ x 3″ (die cut circle mat), 1″ x 1-1/2″ (die cut berries)
  • Shaded Spruce – 1″ x 2″ (die cut leaf sprig)
  • Old Olive – 1-3/4″ x 2″ (die cut pine sprigs)
  • Basic Beige – 1″ x 2″ (label)
  • Basic White – 3-3/4″ x 5″ (inside panel)
  • Sentimental Christmas DSP – 2-3/4″ x 4-1/2″ (striped panel), 3-1/2″ x 4-1/4″ (trees panel), 1/2″ x 5″ (inside trim), fussy cut birds and greenery, die cut deer circle

Stampin’ Up! products used in this project:


Stampin’ Up! Cake Celebrations for the Inkin’ Krew Blog Hop

Good Morning! Welcome to the December Inkin’ Krew Team Blog Hop! The theme for this month’s hop is “Celebrate” and I used the pretty Stampin’ Up! Cake Celebrations bundle from the latest Online Exclusives release to make an Anniversary card. You can find the supplies I used along with card stock cuts at the bottom of my post.

This is a fun fold card that is wonderful for showing both sides of pretty designer series paper since it uses a folded piece of DSP for the ‘card base’. I folded and burnished a panel of Regal Winter designer series paper and adhered it to a gold foil mat and then to a Real Red card base.

For the card front, I embossed a Basic White panel with the Distressed tile embossing folder and cut a Gold Foil panel with the die from the Perennial Postage dies. I adhered the embossed panel to the die cut foil and adhered it to the short front flap of DSP. I also cut the cake stand from the Stampin’ Up! Cake Celebrations dies from Gold foil and adhered it together.

I cut the two pieces of cake from Basic White using the Stampin’ Up! Cake Celebrations dies and I cut the frosting from white glimmer paper. I adhered the frosting to the cake and adhered the two cake layers and cake stand together using thin lines of liquid glue. I adhered the cake to the card front with dimensionals.

I stamped several flowers from the Stampin’ Up! Cake Celebrations stamp set using Real Red ink and leaves using Shaded Spruce ink. I cut them out with the coordinating dies and adhered them to the cake with glue dots. I stamped the sentiment from the Stampin’ Up! Cake Celebrations stamp set using versamark ink on Shaded Spruce and sprinkled it with white embossing powder. I shook off the excess and heated the powder with my heat tool until it was bright and shiny and then fussy cut it with my paper snips. I adhered the sentiment to the card with pieces of dimensionals and finished with clear sparkle gems.

For the inside of the card, I stamped the sentiment from the Stampin’ Up! Cake Celebrations stamp set in Real Red ink on a Basic White panel. I adhered a die cut leaf sprig and flower in the corner and adhered the panel to the inside of the card with Stampin’ Seal.

The Stampin’ Up! Cake Celebrations cakes are beautiful, whether die cut or stamped. And the little flowers and leaf sprigs are perfectly sized for decorating the cake. It’s a wonderful bundle for making yummy cake cards.

On With The Hop! Click on the Next Blog button to move forward to Karen’s project or click the Previous Blog button to move back to see the project that AnnLouise created.

If you get lost along the way, here are the participants for the hop:

  1. Ann Louise Fodgaard 
  2. Akiko Sudano <– you are here
  3. Karen Finkle 
  4. Christie King 
  5. Mary Deatherage 
  6. Tara Carpenter 
  7. Karen Ksenzakovic 
  8. Amy Koenders

Current Host Code: VT29C2UC

Use this host code when you order $50 or more and receive a Thank You gift from me!  The free gift is your choice of any currently available item valued up to $10.00.

If your order is over $150, please do not use the host code since you’ll receive your own Host Dollars plus I’ll still send you the Thank You gift!  This host code can be used by anyone, no club or commitment required. Let me know if you have any questions.


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.  Happy Stamping!

Thanks for stopping by and have a great week!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! Last Chance items here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my online frequent shopper customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Real Red – 4-1/4″ x 5-1/2″ card base
  • Shaded Spruce – 1″ x 3″ (label)
  • Gold Foil Sheets – 4″ x 5-1/4″ (DSP mat), 3-1/2″ x 4-3/4″ (postage die cut), 2-1/2″ x 2-1/2″ (cake stand)
  • White Glimmer – 1″ x 2″ (die cut frosting)
  • Basic White – two 3″ x 4-1/4″ panels (inside panel and embossed background), 2″ x 4″ (die cut flowers & leaves), 1-1/4″ x 4″ (die cut cakes)
  • Regal Winter DSP – 5-1/8″ x 6″ panel, scored at 3-7/8″

Stampin’ Up! products used in this project:

Stampin’ Up! Regal Flora for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! One of the prettiest sets of designer series papers in the retiring Mini Catalog is the Regal Winter designer series paper and it goes beautifully with the Stampin’ Up! Regal Flora bundle. I used the pretty stamp set with the DSP to make a sending love card for today. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a pretty sketch challenge this week:

I stamped the sentiment from the Stampin’ Up! Regal Flora stamp set using Versamark ink on the bottom front of a Shaded Spruce card base. I sprinkled it with white embossing powder and shook off the excess. I heated the powder with my heat tool until it was bright and shiny.

I cut a panel of Regal Winter designer series paper into thirds and adhered the strips to a Basic Black mat with liquid glue. I wrapped the panel with a length of Shaded Spruce ribbon and tied a knot before adhering the panel to the card with dimensionals.

I finished the card front with faceted iridescent gems.

For the inside panel, I stamped leaf cluster from the Stampin’ Up! Regal Flora stamp set using Shaded Spruce ink on the corner of a Basic White panel. I trimmed the bottom with DSP and adhered the panel to the inside of the card with Stampin’ Seal.

The Stampin’ Up! Regal Flora bundle and Regal Winter designer series paper are on the Last Chance products list and the DSP and the dies are currently discounted. So now is a great time to get these beautiful products before they’re sold out.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Karen Ksenzakovic has created.

If you get lost along the way, here are the participants for the hop:


Current Host Code: VT29C2UC

Use this host code when you order $50 or more and receive a free gift from me!  The free gift is your choice of any item currently available valued up to $10.00!

If your order is over $150, please do not use the host code since you’ll receive your own Host Dollars plus I’ll still send you the free gift!  This host code can be used by anyone, no club or commitment required. Let me know if you have any questions.


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions. 

Thanks for stopping by and Happy Stamping!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! Last Chance items here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my online frequent shopper customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Shaded Spruce – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
  • Basic Black – 3-1/8″ x 4″ (DSP mat)
  • Basic White – 3-3/4″ x 5″ (circle background)
  • Regal Winter DSP – 3-3/5″ x 3″ panel cut into 1-1/4″ x 3″ strips (front DSP panel), 1/2″ x 3-3/4″ (inside trim)

Stampin’ Up! products used in this project:


Stampin’ Up! Regal Flora Thank You Card

Good morning and Happy December! The Regal Winter designer series paper is so beautiful and it goes perfectly with the Stampin’ Up! Regal Flora bundle. This bundle has pretty flowers and sentiments and the dies include a beautiful label die. I used the bundle and DSP to make a Thank You card. You can find the products I used at the bottom of my post along with the card stock sizes.

I adhered a panel of Regal Winter designer series paper to a Basic White mat and then to the front of a Pretty Peacock card base with liquid glue.

I cut the pretty label die from the Stampin’ Up! Regal Flora dies from Basic White and stamped the leaf and twig cluster in Granny Apple Green. I stamped the sentiment using Pretty Peacock ink and adhered the label to the card with liquid glue.

I stamped the triple flower cluster from the Stampin’ Up! Regal Flora stamp set using Real Red ink on Basic White andcut them out with the coordinating die. I adhered the flowers to the label with dimensionals. I used the Layers of Beauty dies to cut the long skinny leaf sprigs from Shaded Spruce and adhered them under the flowers with liquid glue. I finished with a Cherry Cobbler bow and iridescent foil gems in the flower centers.

For the inside of the card, I stamped the flowers from the Stampin’ Up! Regal Flora stamp set using Real Red ink in the corner of a Basic White panel. I trimmed the bottom with DSP and adhered the panel the inside of the card with Stampin’ Seal.

The Regal Winter designer series paper is so rich and colorful, it’s just beautiful! It’s perfect for making quick cards and the Stampin’ Up! Regal Flora bundle stamps and dies make the perfect embellishments.


Designer Series Paper Special Release Coming December 3, 2024

As a special release, Stampin’ Up! is offering three previously released Designer Series Papers with a twist: they’ve recolored them! Here are the papers:

  • Serene Love is recolored from True Love.
  • Refreshed Beauty is recolored from Blackberry Beauty.
  • Shades & Hues is recolored from Color Theory.

These paper packs will be available in the Online Exclusives category of the Online Store while supplies last. Click on the picture below to download a brochure with the details:


Current Host Code: VT29C2UC

Use this host code when you order $50 or more and receive a Thank You gift from me!  The free gift is your choice of any item currently available valued up to $10.00.

If your order is over $150, please do not use the host code since you’ll receive your own Host Dollars plus I’ll still send you the Thank You gift!  This host code can be used by anyone, no club or commitment required. Let me know if you have any questions.


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now Button on the right side of the screen to go directly to my Online store or contact me if you have any questions.  Happy Stamping!

Thanks for stopping by and have a great day!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! clearance rack specials here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my online frequent shopper customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Pretty Peacock – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
  • Shaded Spruce – 1-4/4″ x 2″ (die cut leaf sprigs)
  • Basic White – two 4″ x 5-1/4″ panels (inside panel and front mat), 2-1/2″ x 4″ (label), 2″ x 2-1/4″ (flowers
  • Regal Winter DSP – 3-7/8″ x 5-1/8″ (front background), 1-1/2″ x 4″ (inside trim)

Stampin’ Up! products used in this project: