Stampin’ Up! Beautiful Motifs Thank You Card

Good Morning! Today’s Thank You card was inspired by the pretty box on page 52 of the 2025-2026 Annual Catalog using the Stampin’ Up! Beautiful Motifs bundle. But I wanted to use the new Peaceful Garden designer series paper and make a layered card. You can find the card stock cuts along with supplies at the bottom of my post.

Cut and adhere panels of Peaceful Garden designer series paper to the front of a Misty Moonlight card base using liquid glue.

Die cut the pretty wildflowers from Basic White and Cloud Cover card stock using the Stampin’ Up! Beautiful Motifs dies and adhered them to the card using glue dots. Stamp the flower from the Gallery Blooms stamp set using Misty Moonlight ink on Basic White and cut it out with the coordinating die. Adhere the stamped flower to the card with glue dots. Fold a length of Cloud Cover ribbon in half and adhere it to the card with glue dots.

Stamp the sentiment from the Stampin’ Up! Beautiful Motifs stamp set using Versamark ink on Misty Moonlight. Sprinkle it with white embossing powder and heat set. Cut it out with the small short Textured Notes die and adhere it to the card with dimensionals. Finish with Misty Moonlight flowers.

For the inside panel, stamp the wildflower from the Gallery Blooms stamp set using Misty Moonlight ink in the corners of a Basic White panel. Trim the bottom with DSP and adhere the panel to the inside of the card with Stampin’ Seal.

I love that the stamped and die cut flowers from the Stampin’ Up! Beautiful Motifs and Gallery Blooms stamp sets are similar to the flowers in the Peaceful Garden DSP. I wonder if I should have put mats behind the smaller DSP panels. What do you think?

Thanks so much for stopping by and Happy Stamping!!

Akiko

Cardstock Cuts for this project:

Misty Moonlight – 4-1/4″ x 11″ card base, scored at 5-1/2″, 1-1/2″ x 3″ (label)
Cloud Cover – 1-1/2″ x 4-1/4″ (die cut flower)
Basic White – 3-3/4″ x 5″ (inside panel), two 1-1/2″ x 4-1/4″ (die cut and stamped flowers)
Peaceful Garden DSP – 4-1/4″ x 5-1/5″ (front background), 2-1/2″ x 4-1/2″ (floral layer), 1-1/2″ x 4″ (plaid layer), 1/2″ x 3-3/4″ (inside trim)

Stampin’ Up! products used in this project:

Beautiful Motifs Bundle (English)

[165206]

$45.75

Gallery Blooms Bundle

[165213]

$53.00

Textured Notes Dies

[165555]

$31.00

Peaceful Garden 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper

[165917]

$12.50

Misty Moonlight 8-1/2" X 11" Cardstock

[153081]

$14.00

Cloud Cover 8 1/2" X 11" Cardstock

[165621]

$14.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Misty Moonlight Classic Stampin' Pad

[153118]

$9.00

Versamark Pad

[102283]

$9.50

Basics Wow! Embossing Powder

[165679]

$21.00

Hues Of Blue Flowers

[165930]

$9.00

Cloud Cover 3/8" (1 Cm) Faux Linen Ribbon

[165271]

$8.00

Multipurpose Liquid Glue

[110755]

$6.00

Mini Glue Dots

[103683]

$7.25

Stampin' Dimensionals

[104430]

$4.25

Stampin' Seal

[152813]

$8.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Stampin’ Up! Gallery Blooms and Beautiful Motifs for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! I used the Stampin’ Up! Gallery Blooms and Beautiful Motifs bundles to make a quick and easy Thinking of You card. This is also a very simple fun fold where the landscape in the Beautiful Gallery 6″ x 6″ designer series paper covers the front of the card and extends to the trim on the inside. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a color challenge this week:

Start with a 3-7/8″ x 5-1/8″ Beautiful Gallery 6″ x 6″ DSP panel and cut 1 inch off the right side so you have two panels with a continuous design. Adhere the large panel to a Very Vanilla mat and adhere the skinny panel to the right side of the Very Vanilla inside panel.

Adhere the large layered DSP panel to the front of the card with liquid glue. Use the Stampin’ Up! Beautiful Motifs dies to cut the leaf cluster and wildflowers from Mossy Meadow and Basic Beige card stocks. Adhere the die cuts to the card front with glue dots. Make a loopy bow with linen thread and adhere it with a glue dot.

Stamp the sentiment from the Stampin’ Up! Beautiful Motifs stamp set on Very Vanilla using Pecan Pie ink and cut it out with the second smallest circle from the Stylish Shapes dies. cut a Pecan Pie circle using the second smallest Spotlight on Nature dies and adhere it to the back of the label. Adhere the label to the card with dimensionals and finish with Cajun Craze gems.

Stamp the left side of the inside panel with the wildflower from the Stampin’ Up! Gallery Blooms stamp set using twice stamped off Pecan Pie ink. Adhere the panel to the inside of the card with Stampin’ Seal.

I love to use beautiful designer series paper on cards because it makes it so easy! Add a few complimentary die cuts with a pretty sentiment label and a few embellishments and you have an impressive handmade card that anyone would be happy to receive.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Tara Carpenter has created.

If you get lost along the way, here are the participants for the hop:

Thanks for stopping by and Happy Stamping!

Akiko

Cardstock Cuts for this project:

Cajun Craze – 5-1/2″ x 7-1/2″ card base, scored at 3-1/4″
Mossy Meadow – 2-1/2″ x 4-1/2″ (leaf die cut)
Pecan Pie – 1-3/4″ x 1-3/4″ (label mat)
Basic Beige – 2″ x 4-1/2″ (flower die cut)
Very Vanilla – 4″ x 5-1/4″ (inside panel), 3″ x 5-1/4″ (front DSP mat), 1-1/2″ x 1-1/2″ (label)
Beautiful Gallery 6″ x 6″ DSP – 2-7/8″ x 5-1/8″ (front background), 1″ x 5-1/8″ (inside side trim)

Stampin’ Up! products used in this project:

Gallery Blooms Bundle

[165213]

$53.00

Beautiful Motifs Bundle (English)

[165206]

$45.75

Stylish Shapes Dies

[159183]

$30.00

Spotlight On Nature Dies

[163580]

$35.00

Beautiful Gallery 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper

[165196]

$12.50

Cajun Craze 8-1/2" X 11" Cardstock

[119684]

$14.00

Mossy Meadow 8-1/2" X 11" Cardstock

[133676]

$14.00

Pecan Pie 8 1/2" X 11" Cardstock

[161717]

$14.00

Basic Beige 8 1/2" X 11" Cardstock

[164511]

$14.00

Very Vanilla 8 1/2" X 11" Cardstock

[166784]

$14.00

Pecan Pie Classic Stampin' Pad

[161665]

$9.00

Cajun Craze & Gold Dots

[165984]

$9.00

Linen Thread

[104199]

$5.00

Multipurpose Liquid Glue

[110755]

$6.00

Stampin' Dimensionals

[104430]

$4.25

Mini Glue Dots

[103683]

$7.25

Stampin' Seal

[152813]

$8.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Stampin’ Up! Gallery Blooms for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! I used the Stampin’ Up! Gallery Blooms bundle along with other products from the Beautiful Gallery suite to make a Here for You card. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a pretty sketch challenge this week and I substituted a simple bow for the greenery below the center panel.

Emboss a strip of Cloud Cover Beautiful Gallery 6″x 6″ designer series paper with the pretty Damask Designs embossing folder and adhere it to another panel of Beautiful Gallery DSP. Adhere the layered DSP panel to a Pecan Pie mat and pop it on the front of a Basic Beige card base with dimensionals.

Stamp the sentiment from the Beautiful Motifs stamp set using Pecan Pie ink on Cloud Cover and cut it out with the second smallest square from the Stylish Shapes dies. Adhere it to a Pecan Pie mat and pop it on the card with dimensionals. Stamp the flowers from the Stampin’ Up! Beautiful Gallery stamp set using Pecan Pie ink on Basic Beige. Color the flowers with white craft ink using a blender pen and the leaves with the light Cloud Cover Stampin’ Blend marker. Use the light Daffodil Delight Stampin’ Blend to color the flower centers. After the flowers dry (it takes a while for the white craft ink to dry completely) cut the flowers out with the coordinating die.

Adhere the flowers to the card over the sentiment with dimensionals. Make a loopy Basic Beige bow and adhere it to the card with a glue dot under the sentiment. Finish with textured dots.

For the inside, stamp the flowers from the Stampin’ Up! Gallery Blooms stamp set using Pecan Pie ink on the top of a Basic White panel and color the leaves with the light Cloud Cover Stampin Blend. Emboss a strip of Beautiful Gallery DSP with the Damask Designs embossing folder and adhere the panel to the inside of the card with Stampin’ Seal.

I tried using white watercolor pencils to make the flowers white, but I found the white craft ink with the Blender Pen works best. I love how the white flowers pop against the beige background!

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Tara Carpenter has created.

If you get lost along the way, here are the participants for the hop:

Thanks for stopping by and Happy Stamping!

Akiko

Cardstock Cuts for this project:

Basic Beige – 4-1/4″ x 11″ card base, scored at 5-1/2″, 2″ x 3″ (flower die cut)
Pecan Pie – 1-5/8″ x 1-5/8″ (label mat)
Cloud Cover – 1-3/4″ x 1-3/4″ (label)
Basic White – 3-3/4″ x 5″ (inside panel)
Beautiful Gallery 6″ x 6″ DSP – 3-3/4″ x 5″ (front background), 1-1/4″ x 3-3/4″ (embossed stripe), 1/2″ x 3-3/4″ (inside trim)

Stampin’ Up! products used in this project:

Gallery Blooms Bundle

[165213]

$53.00

Beautiful Motifs Photopolymer Stamp Set (English)

[165198]

$18.00

Stylish Shapes Dies

[159183]

$30.00

Damask Designs Embossing Folder

[165214]

$9.50

Beautiful Gallery 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper

[165196]

$12.50

Basic Beige 8 1/2" X 11" Cardstock

[164511]

$14.00

Pecan Pie 8 1/2" X 11" Cardstock

[161717]

$14.00

Cloud Cover 8 1/2" X 11" Cardstock

[165621]

$14.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Pecan Pie Classic Stampin' Pad

[161665]

$9.00

Uninked Stampin’ Craft Pad & Whisper White Refill

[147277]

$10.50

Cloud Cover Stampin’ Blends Combo Pack

[165287]

$11.00

Daffodil Delight Stampin' Blends Combo Pack

[154883]

$11.00

Adhesive Backed Textured Dots

[163338]

$8.00

Basic Beige 3/8" (1 Cm) Classic Ribbon

[165216]

$9.50

Multipurpose Liquid Glue

[110755]

$6.00

Stampin' Dimensionals

[104430]

$4.25

Mini Glue Dots

[103683]

$7.25

Stampin' Seal

[152813]

$8.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Stampin’ Up! Gallery Blooms Sneak Peek for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! The Stampin’ Up! Gallery Blooms bundle is another new bundle from the upcoming Stampin’ Up! 2025-2026 Annual Catalog that will be available on May 6, 2025. I used it with the retiring Countryside Coners dies and some pretty vintage floral Beautiful Gallery 6″ x 6″ designer series paper to make a Z-fold Wedding card for today. You can find the currently available supplies I used along with card stock cuts at the bottom of my post. Note: My supply list may not be very useful since most of the items I used are from the upcoming Annual Catalog.

This week’s challenge is to make a fun fold card!

After scoring and burnishing the Cloud Cover card base, I adhered floral panels of Beautiful Gallery 6″ x 6″ designer series paper to the front flap and back panel with liquid glue. I embossed a Cloud Cover panel with the new Damask Designs embossing folder and adhered it to the middle section.

I cut a Secret Sky panel with the second largest retiring Countryside Corners die and cut a Cloud Cover panel with the third largest die. I embossed the Cloud Cover die cut with the Damask Designs embossing folder and adhered it to the larger die cut. I adhered the layered die cuts to the card front flap with liquid glue. I stamped the large roses from the Stampin’ Up! Gallery Blooms stamp set using Secret Sky ink on Basic White and cut it out with the coordinating die. I adhered it to the embossed panel with glue dots.

I stamped the sentiment from the Beautiful Motifs stamp set using Secret Sea ink on Cloud Cover and cut it out with the small Countryside Corners die. I adhered it to the card with dimensionals and finished with a white bow and Secret Sea dots.

For the inside of the card, stamped the sentiment from the Beautiful Motifs stamp set using Secret Sea ink on Basic White. I used twice stamped off Secret Sea ink to stamp the large floral from the Stampin’ Up! Gallery Blooms stamp set in the corner and cut it out with the third largest Countryside corners die. I adhered it to the back panel of the card with liquid glue so it is hidden when the card is closed.

The Stampin’ Up! Gallery Blooms bundle has beautiful florals with a vintage feel and wonderful coordinating dies. And it has a pretty double frame die that makes your cards look like they belong in an art museum. Here is the stamp set and dies:

And here is the Gallery Motifs bundle:

These bundles and the Beautiful Gallery 6″ x 6″ designer series paper are part of the new Beautiful Gallery Suite in the upcoming Stampin’ Up! 2025-2026 Annual Catalog that will be available on May 6.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Karen Ksenzakovic has created.

If you get lost along the way, here are the participants for the hop:

If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.

Thanks for stopping by and Happy Stamping!

Akiko

Visit my online store here
See the current Stampin’ Up! Last Chance items here
Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

Cloud Cover – 4-1/4″ x 11″ card base, scored at 2-3/4″ and 5-1/2″, 2-1/2″ x 4″ (embossed panel), 2-3/4″ x 4-1/4″ (embossed die cut), 1″ x 3″ (label
Secret Sea – 3-1/4″ x 4-3/4″ (die cut mat)
Basic White – 2-3/4″ x 4-1/4″ (inside die cut)
Beautiful Gallery 6″ x 6″ DSP – 4″ x 5-1/4″ (inside background), 2-1/2″ x 4″ (front flap panel)