Stampin’ Up! Simply Said Hello Card for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! Here’s a simple hello card made with the Stampin’ Up! Simply Said stamp set and the pretty Celebration Sips designer series paper. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a pretty sketch challenge this week:

Adhere a panel of Celebration Sips designer series paper to a Berry Burst card base with liquid glue. Cut another panel of DSP with one of the Textured Notes rectangle dies and adhere it to a Timid Tiger mat. Adhere the layered DSP panel to the card with dimensionals.

Stamp the sentiment from the Stampin’ Up! Simply Said stamp set using Blackberry Bliss ink on Timid Tiger. Cut it out using the Textured Notes die using the two step method so that it is shorter and fits the sentiment.

Use the light Berry Burst Stampin’ Blends marker to color a length of white ribbon. Fold the ribbon and adhere it to the back of the sentiment label with Stampin’ Seal. Adhere the label to the card with dimensionals and finish with Blackberry Bliss Shimmer Gems.

For the inside, use the small flower dies from the Impressions Abloom dies to cut Berry Burst, Daffodil Delight and Timid Tiger flowers. Use the Black Stampin’ Write marker to color the center and adhere them to a corner of a Basic White panel. Adhere a strip of DSP to the bottom of the panel and adhere it to the inside of the card with Stampin’ Seal.

The Stampin’ Up! Simply Said stamp set is my go to set for simple sentiments. They are the most commonly used sentiments and the fonts will go with many different styles.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Tara Carpenter has created.

If you get lost along the way, here are the participants for the hop:

Thanks for stopping by and Happy Stamping!

Akiko

Cardstock Cuts for this project:

Berry Burst – 4-1/4″ x 11″ card base, scored at 5-1/2″, 1″ x 1″ (die cut flowers)
Timid Tiger – 2-7/8″ x 4-3/8″ (floral DSP mat), 1-1/4″ x 2-1/2″ (label), 1″ x 1″ (die cut flowers)
Daffodil Delight – 1″ x 1″ (die cut flowers)
Basic White – 4″ x 5-1/4″ (inside panel)
Celebratory Sips DSP – 4″ x 5-1/4″ (front background), 3″ x 4-1/2″ (floral panel), 1/2″ x 4″ (inside trim)

Stampin’ Up! products used in this project:

Simply Said Mix & Match Photopolymer Stamp Set (English)

[163756]

$17.00

Textured Notes Dies

[165555]

$31.00

Impressions Abloom Dies

[165610]

$34.00

Celebratory Sips 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper

[165586]

$12.50

Berry Burst 8-1/2" X 11" Cardstock

[144243]

$14.00

Timid Tiger 8 1/2" X 11" Cardstock

[165626]

$14.00

Daffodil Delight 8-1/2" X 11" Cardstock

[119683]

$14.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Blackberry Bliss Classic Stampin' Pad

[147092]

$9.00

Berry Burst Stampin’ Blends Combo Pack

[161681]

$11.00

Basic Black Stampin' Write Marker

[162481]

$3.50

Purple Fine Shimmer Gems

[162611]

$8.00

White 1/4" (6.4 Mm) Ribbon

[165562]

$8.00

Multipurpose Liquid Glue

[110755]

$6.00

Stampin' Dimensionals

[104430]

$4.25

Mini Glue Dots

[103683]

$7.25

Stampin' Seal

[152813]

$8.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Stampin’ Up! Spooky Halloween Card

Good Morning! Are you ready for Halloween? The Stampin’ Up! Spooky Halloween bundle is such a cute set for Halloween and I’m using it with the Celebratory Sips designer series paper to make a Halloween card. You can find the card stock cuts along with the supplies at the bottom of my post.

Adhere a strip of Secret Sea Celebratory Sips DSP to a striped Timid Tiger panel with liquid glue and adhere them both to the light side of a Timid Tiger two-tone card stock mat. Adhere the layered DSP to the front of a Timid Tiger card base with liquid glue.

Cut the haunted house from Secret Sea card stock using the die from the Stampin’ Up! Spooky Halloween dies. Fussy cut a Daffodil Delight panel to cover the back of the die cut holes and adhere it to the back of the house. Use blending brushes to apply Granny Apple Green, Daffodil Delight, Timid Tiger, Berry Burst and Secret Sea inks to a Basic White panel. This makes a simple outdoor sunset background. Stamp the bats in the corner using Secret Sea ink. Adhere the blended panel to a Secret Sea mat and adhere the layered panel to the card front.

Adhere the haunted house to the blended panel with dimensionals. Use the bare tree die from the Loveliest Tree dies to cut an Early Espresso panel and adhere it next to the house. Stamp the sentiment from the Stampin’ Up! Spooky Halloween stamp set using Granny Apple Green ink on Basic White and cut it out using the Stylish Shapes banner die. Adhere the label with dimensionals and finish with tiny white glitter stars.

For the inside panel, stamp the sentiment from the Stampin’ Up! Spooky Halloween stamp set using Timid Tiger ink on a Basic White panel. Stamp the bats in Secret Sea and adhere DSP to the bottom. Adhere the panel to the inside of the card with Stampin’ Seal.

The haunted house from the Stampin’ Up! Spooky Halloween dies is just wonderful (along with the rest of the stamps and dies in the great little bundle)! But did you ever think the Celebratory Sips DSP could be used for a Halloween card? The Timid Tiger stripes make a perfect backdrop. And I love to do blended nighttime backgrounds with a haunted house for Halloween card. This one was super simple!

Thanks so much for stopping by and Happy Stamping!!

Akiko

Cardstock Cuts for this project:

Timid Tiger – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
Two-tone Timid Tiger – 4″ x 5-1/2″ (front mat)
Secret Sea – 2″ x 3″ (die cut haunted house), 2-3/4″ x 3-1/2″ (blended background mat)
Daffodil Delight – 1-1/4″ x 2-1/4″ (haunted house lights)
Early Espresso – 1″ x 2″ (die cut tree)
Basic White – 4″ x 5-1/4″ (inside panel), 2-1/2″ x 3-1/4″ (blended background), 1″ x 3″ (label)
Celebratory Sips DSP – 3-7/8″ x 5-1/8″(front background), 1-1/4 x 5-1/8″ (Secret Sea front stripe), 1/2″ x 5-1/4″ (inside trim)

Stampin’ Up! products used in this project:

Product List

Spooky Halloween Bundle (English)

[166199]

$45.00

Loveliest Tree Dies

[163715]

$20.00

Stylish Shapes Dies

[159183]

$30.00

Celebratory Sips 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper

[165586]

$12.50

Timid Tiger 8 1/2" X 11" Cardstock

[165626]

$14.00

Timid Tiger 12" X 12" (30.5 X 30.5 Cm) Two Tone Cardstock

[166706]

$10.00

Secret Sea 8 1/2" X 11" Cardstock

[165624]

$14.00

Daffodil Delight 8-1/2" X 11" Cardstock

[119683]

$14.00

Early Espresso 8-1/2" X 11" Cardstock

[119686]

$14.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Secret Sea Classic Stampin' Pad

[165285]

$9.00

Berry Burst Classic Stampin' Pad

[147143]

$9.00

Timid Tiger Classic Stampin' Pad

[165278]

$9.00

Daffodil Delight Classic Stampin' Pad

[147094]

$9.00

Granny Apple Green Stampin' Pad

[147095]

$9.00

Blending Brushes

[153611]

$15.00

Shimmer Star Foam Stickers

[166202]

$9.50

Multipurpose Liquid Glue

[110755]

$6.00

Stampin' Dimensionals

[104430]

$4.25

Mini Glue Dots

[103683]

$7.25

Stampin' Seal

[152813]

$8.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Stampin’ Up! Cheers & Sips for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! The Stampin’ Up! Cheers & Sips bundle is a perfect for cool refreshment to celebrate the end of a long, hot summer! You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a pretty sketch challenge this week:

Adhere Celebratory Sips designer series paper to the front of a Strawberry Slush card base. Emboss a Granny Apple Green strip with the Glass and Gardens 3D embossing folder and adhere it to the card. Use the Stylish Shapes and Spotlight on Nature dies to cut Basic White and Blackberry Bliss circles and adhere them together. Adhere them to the card with liquid glue.

Use the dies from the Stampin’ Up! Cheers & Sips bundle to cut drinks from the Celebratory Sips DSP. Cut them again from Basic White and adhere the backings to the DSP die cuts. Adhere the tall drink to the card with liquid glue and the short drink with dimensionals. Use the Cloud Cover Stampin’ Spot to to stamp the umbrella on a yellow Celebratory Sips DSP square and cut it out with the coordinating die. Adhere it to a Basic White umbrella die cut and pop it on the card with dimensionals.

Use the dies from the Stampin’ Up! Cheers & Sips bundle to cut different fruits and leaves from the Celebratory Sips DSP and adhere them to the card with glue dots and dimensionals. Stamp the sentiment using Blackberry Bliss ink on Pretty in Pink card stock and cut it out with the Stylish Shapes banner die. Adhere it to the card with glue dots and dimensionals and finish with sparkly gems.

For the inside, Stamp the sentiment from the Stampin’ Up! Cheers & Sips stamp set in the corner of the last Basic White oval using Granny Apple Green ink and trim with DSP. Adhere the panel to the inside of the card with Stampin’ Seal..

The Stampin’ Up! Cheers & Sips bundle is such a pretty and fun set! It makes you feel like you’re on vacation in a tropical paradise.

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Tara Carpenter has created.

If you get lost along the way, here are the participants for the hop:

Thanks for stopping by and Happy Stamping!

Akiko

Cardstock Cuts for this project:

Strawberry Slush – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
Granny Apple Green -2″ x 4-1/2″ (embossed strip)
Blackberry Bliss – 3-1/2″ x 3-1/2″ (die cut circle)
Pretty In Pink – 1-1/4″ x 2″ (label)
Basic White – 4″ x 5-1/4″ (inside panel), 3-1/4″ x 3-1/4″ (die cut circle), 3″ x 3″ (die cut drink backing)
Celebratory Sips DSP – 4-1/4″ x 5-1/2″ (front background), 1/2″ x 5-1/4″ (inside trim), yellow square, die cut and fussy cut drinks and fruits