Stampin’ Up! Traditional Labels for the Happy Inkin’ Thursday Blog Hop

Good Morning and welcome to the Happy Inkin’ Thursday Blog Hop! The Stampin’ Up! Traditional Labels bundle has wonderful sentiments for Christmas cards and tags and goes beautifully with the Christmas Greenery bundle and Traditions of Christmas specialty designer series paper. This is my go to for this year’s Christmas cards and I’ve been busy trying to get them done. You can find the supplies I used along with card stock cuts at the bottom of my post.

We have a color challenge this week that picks up nicely with the Traditions of Christmas DSP:

Adhere a strip of Traditions of Christmas DSP to another panel and adhere them both to a Real Red Mat. Wrap the layered panel with Secret Sea ribbon and make a bow on the side. Adhere the panel to the front of a Real Red card base.

Cut the big leaf and two holly leaves from the Christmas Greenery dies from Old Olive and adhere them to the card with glue dots. Cut the pine sprig from Secret Sea and gold foil sheets and adhere them to the card with glue dots.

Stamp the sentiments from the Stampin’ Up! Traditional Labels stamp set using Real Red ink on Pool Party and cut it out with the large label die. Adhere the label to the card using dimensionald and finish with sparkly sequins.

For the inside, stamp the flower and pine branch from the Christmas Greenery stamp set stamped off Real Red, Secret Sea and Old Olive inks in the corner of a Basic White panel. Trim the bottom with DSP and adhere the panel to the inside of the card with Stampin’ Seal.

This card is a bit thick because of the bow, so I will probably tuck it into a gift package or give it directly to the recipient rather than put it in the mail. But I’ve made lots of flat, mailable, beautiful Christmas cards with the Stampin’ Up! Traditional Labels bundle and Traditions of Christmas DSP, so no one will be missing out. Making Christmas cards is one of my favorite parts of stamping and using these beautiful products makes it a big pleasure!

On with the Hop! Click on the Next Blog button to move forward to see the beautiful project Tara Carpenter has created.

If you get lost along the way, here are the participants for the hop:

Thanks for stopping by and Happy Stamping!

Akiko


Cardstock Cuts for this project:

  • Real Red – 4-1/4″ x 11″ card base, scored at 5-1/2″, 4″ x 5-1/4″ (DSP mat)
  • Old Olive – 3″ x 5-1/2″ (die cut leaves)
  • Secret Sea – 2″ x 4-3/4″ (die cut pine sprig)
  • Pool Party – 2-1/4″ x 3-1/2″ (label)
  • Gold Foil – 2″ x 4-3/4″ (die cut pine sprig)
  • Basic White – 3-3/4″ x 5″ (inside panel)
  • Traditions of Christmas specialty DSP – 3-7/8″ x 5-1/8″ (front background), 2-1/4″ x 3-7/8″ (front stripe), 1/2″ x 3-3/4″ (inside trim)

Stampin’ Up! products used in this project:

Stampin’ Up! Traditional Labels Seasons Greetings Card

Good Morning! Here’s a super simple Christmas card made with the Stampin’ Up! Traditional Labels bundle and the beautiful Traditions of Christmas specialty designer series paper. You can find the card stock cuts along with supplies at the bottom of my post.

Adhere a Secret Sea panel of Traditions of Christmas specialty designer series paper to the front of a Secret Sea card base.

Adhere a floral pattern of Traditions of Christmas specialty designer series paper to a Real Red mat with liquid glue and pop it on the card with dimensionals.

Stamp the sentiment from the Stampin’ Up! Traditional Labels stamp set on Basic White card stock using Real Red ink. Cut it out with the coordinating banner die and adhere it to the card with dimensionals. Finish with three Cherry Cobbler dots.

For the inside panel, trim the bottom of a Basic White panel with pretty DSP and adhere it to the inside of your card with Stampin’ Seal.

So quick and easy and the beautiful Traditions of Christmas specialty designer series paper really shines. The fancy banner label made with the Stampin’ Up! Traditional Labels bundle is also quick and adds so much elegance!

Thanks so much for stopping by and Happy Stamping!!

Akiko

Cardstock Cuts for this project:

  • Secret Sea – 5-1/2″ x 8-1/2″ card base, scored at 4-1/4″
  • Real Red – 3-1/4″ x 4-1/4″ (DSP mat)
  • Basic White – 4″ x 5-1/4″ (inside panel), 1-3/4″ x 4-1/2″ (label)
  • Traditions of Christmas DSP – 4-1/4″ x 5-1/2″(front background), 3 x 4″ (DSP panel), 1/2″ x 4″ (inside trim)

Stampin’ Up! products used in this project:


Stampin’ Up! Christmas Greenery with Traditional Labels

Good Morning! The Traditions of Christmas specialty designer series paper is one of the prettiest packs that I’ve seen in a long time. I used it with the Stampin’ Up! Christmas Greenery and Traditional Labels bundles to make another Christmas card for today – and it’s PINK! You can find the card stock cuts along with the currently available supplies at the bottom of my post.

Adhere a panel of Traditions of Christmas DSP to a Real Red mat and then to the front of a Bubble Bath card base with liquid glue. Use the Stampin’ Up! Christmas Greenery dies to cut Pool Party, Old Olive and Shaded Spruce card stock leaves and adhere them to the card with glue dots.

Stamp the sentiments from the Stampin’ Up! Traditional Labels stamp set using Real Red ink on Bubble Bath and cut it out with the small oval Traditional Labels die. Note that I did practice stamping the two sentiments on printer paper first so I could get a feel for how to line up the second stamp and get even spacing. Use the large oval die to cut gold foil and adhere the small oval using liquid glue.

Adhere the label to the card with dimensionals and finish with a Real Red bow and Pool Party sparkle sequins. That new Real Red ribbon is so pretty with light sparkles!

For the inside panel, flowers from the Stampin’ Up! Christmas Greenery stamp set using Bubble Bath ink in the corner of a Basic White panel. Trim the bottom with DSP and adhere the panel to the inside of the card with Stampin’ Seal.

I love the floral patterns in the DSP and I’m so happy to see so many poinsettias! The Stampin’ Up! Christmas Greenery dies are huge – they easily fill an A2 card and make a festive statement!

Thanks so much for stopping by and Happy Stamping!!

Akiko

Cardstock Cuts for this project:

  • Bubble Bath – 5-1/2″ – 8-1/2″ card base, scored at 4-1/4″, 1-1/2″ x 2-1/4″ (label)
  • Pool Party – 2-1/4″ x 4-1/4″ (die cut leaves)
  • Old Olive – 2″ x 4-3/4″ (die cut pine sprig)
  • Shaded Spruce – 1-3/4″ x 2-1/2″ (die cut leaves)
  • Real Red – 3-7/8″ x 5-1/8″ (DSP mat)
  • Gold Foil – 2″ x 2-3/4″ (label mat)
  • Basic White – 4″ x 5-1/4″ (inside panel)
  • Traditions of Christmas specialty DSP – 3-3/4″ x 5″ (front background), 1/2″ x 4″ (inside trim)

Stampin’ Up! products used in this project:


Stampin’ Up! Traditions of Christmas Sneak Peek

Good Morning! The Stampin’ Up! Traditions of Christmas Suite Collection is a new Christmas Suite from the upcoming September – December 2025 Mini Catalog that will be available on September 3. It’s a beautiful suite with specialty designer series paper, two stamp bundles, embellishments and an embossing folder. I used the Traditional Labels bundle with the beautiful DSP to make a simple and quick Christmas card. You can find the card stock cuts along with the currently available supplies at the bottom of my post.

Adhere a panel of the beautiful Stampin’ Up! Traditions Of Christmas specialty designer series paper to an Old Olive mat, then to the front of a Real Red card base with liquid glue.

Stamp the sentiments from the Traditional Labels stamp set using Versamark ink on Real Red and sprinkle with gold embossing powder. Heat set and cut out the sentiment with the beautiful Traditional Labels die.

Adhere the label to the card with dimensionals and finish with iridescent dots and gold striped bow. Isn’t that paper beautiful!! I love the gold touches and pretty poinsettias.

For the inside panel, trim the bottom of a Basic White panel with the DSP and stamp a sentiment if desired. I used one of my favorites from last year’s Greetings of the Season stamp set in Real Red ink.

Here is the Traditional Labels bundle. They also make great tags.

And here’s the beautiful Traditions of Christmas specialty DSP.

You can see more of the detail on the label die. The dies in the Traditional Labels bundle are extra special with beautiful border details. Beautiful papers and dies make it so easy to create elegant Christmas cards!

The Stampin’ Up! Traditions of Christmas Suite will be available on Sept 3 when the new Mini Catalog goes live.

Thanks so much for stopping by and Happy Stamping!!

Akiko

Cardstock Cuts for this project:

  • Real Red – 5-1/2″ – 8-1/2″ card base, scored at 4-1/4″, 2-1/2″ x 3-1/2″ (label)
  • Old Olive – 4″ x 5-1/4″ (DSP mat)
  • Basic White – 4″ x 5-1/4″ (inside panel)
  • Traditions of Christmas specialty DSP – 3-7/8″ x 5-1/8″ (front background), 1/2″ x 4″ (inside trim)

Stampin’ Up! products used in this project: