Stampin’ Up! Cup of Christmas Card for the Happy Inkin’ Thursday Blog Hop

Happy Halloween and welcome to another Happy Inkin’ Blog Hop! I used the Stampin’ Up! Cup of Christmas photopolymer stamp set for my card today and here is my card.

We have a color challenge this week, and here is the color palette we are using:

My card design was inspired by the Paper Players Sketch Challenge PP465:

I started by adhering a strip of striped Let it Snow specialty designer series paper to a panel of snowflake paper and then adhering them both to a Real Red mat. I die cut a stitched square from Whisper White and ran it through the Winter Knit 3D embossing folder. I adhered it to a scalloped square and then to the Let it Snow background panel.

I die cut the cup from the Cup of Cheer dies from Real Red and the poinsettia from Whisper White. I adhered these together with the fine-tip glue pen. I die cut the candy cane from Real Red and Whisper White and adhered them together with the fine tip-glue pen. I adhered the candy cane to the back of the mug and attached them to the embossed panel with dimensionals.

I stamped the Merry Christmas greeting from the Stampin’ Up! Cup of Christmas stamp set in Real Red on a panel of Whisper White and cut it out with a stitched circle die. I matted in a Real Red scalloped circle and added two Shaded Spruce die cut holly leaves and three Real Red enamel glitter dots. I adhered the label to the Let it Snow panel with dimensionals and then adhered the finished panel to a Coastal Cabana card base with dimensionals.

I decorated the inside of the card with die cut Shaded Spruce holly leaves and Real Red berries on a Whisper White panel. I stamped the sentiment from the Stampin’ Up! Cup of Christmas stamp set in Real Red and added a strip of the snowflake Let it Snow DSP to the bottom. I adhered it to a Real Red mat and then to the inside of the card with liquid glue.

On with the Hop! Click the Next button below to visit Karen Ksenzakovic’s blog.

And just in case you get lost along the way, here’s a list of the team members participating in the hop today:


October 15 – 31 Host Code: 3KQUKV9U

November 1 – 15 Host Code: WR4KJJM4

Use this host code when you order and receive a free gift from me!  If your order is over $150, please do not use this code, but you’ll still get the free gift.  The free gift is your choice of any item valued up to $10.00 in the 2018-19 Annual Catalog or in the 2019 Occasions Catalog!  That includes some of the Host Exclusive stamp sets!


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.  Happy Stamping!

Thanks for visiting!

Akiko

  • Visit my online store here
  • See the current Stampin’ Up! clearance rack specials here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my frequent shopper online customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Coastal Cabana – 4 1/4″ x 11″
  • Real Red – (2) 3 7/8″ x 5 1/8″, 3 1/2″ x 3 1/2″, 2 1/2″ x 2 1/2″, 1 1/4″ x 3″, 2″ x 2″
  • Whisper White – 3 3/4″ x 5″, 3″ x 3″, 2″ x 2 1/4″, 1 1/4″ x 3″, 2″ x 2″
  • Shaded Spruce – 1 1/4″ x 3″
  • Let it Snow DSP – 3 3/4″ x 5″, 1/2″ x 3 3/4″, 1 3/4″ x 3 3/4″

Stampin’ Up! products used in this project:


Stampin’ Up! Snowman Season Christmas Card

Good Morning! Here’s a cute little snowman Christmas Card made with the Stampin’ Up! Snowman Season photopolymer stamp set. I also used the Let It Snow Speciality Designer Paper to create a layered look. This is is such a happy color combination, sure to make Christmas merry! You can find the supplies used to create this card at the bottom of my post along with the sizes of cardstock used. Here’s the card:

I started building the background by cutting the Let It Snow DSP pieces. I matted the large panel on Basic Black and the smaller layering pieces on Real Red. I adhered it all together with liquid glue.

I then stamped the snowman from the Stampin’ Up! Snowman Season stamp set in Memento Tuxedo Black ink on a Panel of Whisper White. I colored it with Real Red, Pool Party, Calypso Coral, Shaded Spruce and Soft Suede Stampin’ Blends. I then cut it out with the largest circle from the Stitched Shapes dies. I added some Snowfall Accents Puff Paint and heat set it. It is so amazing to watch it puff up!! Be careful though as it will start to turn brown if heated too much.

I used the largest scalloped circle from the Layering Circles dies to cut a Real Red mat and adhered it to the back of the circle. I created the label by stamping the Christmas Cheer sentiment from the Itty Bitty Christmas stamp set in Memento Tuxedo Black Ink on a strip of Real Red and trimmed the end. I adhered this to the layered background with liquid glue and then tied the curly ribbon around it and made a bow. I adhered the Snowman Circle to the background with dimensionals and used dimensionals to attach it all to a Real Red card base.

On the inside, I stamped the sentiment from the Stampin’ Up! Snowman Season stamp set in Real Red ink on a panel of Whisper White. I added some snowflakes in Coastal Cabana ink and added a strip of the little snowmen paper to the bottom. I adhered it to a Basic Black mat and then to the inside of the card.

Snowmen are great themes for Christmas cards and for Winter cards afterwards. The snowmen in the Stampin’ Up! Snowman Season stamp set are happy and whimsical and the Let It Snow Specialty Designer paper is a winner too! Thanks for visiting and have a great weekend!

Akiko


October 1 – 15 Host Code: 44YKETNJ

Use this host code when you order and receive a free gift from me!  If your order is over $150, please do not use this code, but you’ll still get the free gift.  The free gift is your choice of any item valued up to $10.00 in the 2018-19 Annual Catalog or in the 2019 Occasions Catalog!  That includes some of the Host Exclusive stamp sets!


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.  Happy Stamping!

  • Visit my online store here
  • See the current Stampin’ Up! clearance rack specials here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my frequent shopper online customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Real Red – 4 1/4″ x 11″, 1 5/8″ x 4 5/8″, 1/2″ x 3″, 2 1/8″ x 2 7/8″, 3 1/2″ x 3 1/2″
  • Basic Black – 4″ x 5 1/4″, 3 3/4″ x 5″
  • Whisper White – 3 5/8″ x 4 7/8″, 3 1/2″ x 3 1/2″
  • Let It Snow DSP – 3 7/8″ x 5 1/8″, 3/4″ x 3 5/8″, 1 1/2″ x 4 1/2″, 2″ x 2 3/4″

Stampin’ Up! products used in this project:


Stampin’ Up! Perfectly Plaid Believe Christmas Card

Good Morning! Today’s card is a Christmas Card made with the Stampin’ Up! Perfectly Plaid Photopolymer stamp set and the Stampin’ Up! Itty Bitty Christmas Cling stamp set. I teamed these up with the Let It Snow Designer Series Paper to make a light and cheerful Christmas Card. You can find the supplies used to create this card at the bottom of my post along with the sizes of cardstock used.

I was inspired by the sketch in the Try Stampin’ On Tuesday Challenge 426 – TSOT426.

I started with a strip of Sparkle Glimmer paper that I used the die cut from the Budding Blooms dies to cut a scalloped edge. I cut a strip of the striped Let It Snow DSP and adhered a strip of Coastal Cabana to the back and edged it with the Sparkle Glimmer paper scalloped edge. I tied a piece of Real Red curly ribbon around the bottom and attached it to a Real Red card base with dimensionals.

I stamped the open leaf tree image from the Stampin’ Up! Perfectly Plaid stamp set on a piece of Coastal Cabana using VersaMark ink. I sprinkled white embossing powder on it and heat set it. Then I punched it out it out with the Pine Tree punch. I punched another pine tree from Sparkle Glimmer paper and attached the trees to the card with liquid glue and dimensionals.

I stamped the believe sentiment from the Stampin’ Up! Itty Bitty Christmas on a strip of Coastal Cabana in VersaMark ink and sprinkled it with white embossing powder and heat set. I trimmed the ends and attached it to a strip of Real Red and attached it to the card. I finished off the card front with three read glittered enamel dots.

I stamped the sentiment from the Stampin’ Up! Perfectly Plaid stamp set in Real Red ink on a panel of Whisper White. I stamped the tree image again in Coastal Cabana in the lower left of the inside panel. I added a strip of the same designer paper that I used on the front of the card to the bottom of the inside panel an adhered it to a Coastal Cabana mat before attaching it to the inside of the card. I also stamped the tree image on the lower left of a white envelope.

Coastal Cabana and Real Red make a cheerful and happy Christmas card. And I guess that this shows how to make a non-plaid Christmas card with the Stampin’ Up! Perfectly Plaid bundle. On Sunday I will be on Facebook Live making a Plaid Christmas card using this bundle on my business page at 1:00 PM Eastern time. I welcome you to tune in. Thanks for visiting and have a great weekend!

Akiko


This image has an empty alt attribute; its file name is 09-19_banner_dsp_us.jpg

Buy 3 Get 1 Free Designer Series Paper Sale

By popular demand, Stampin’ Up! is bringing back the Designer Series Paper Sale! During September 4–30, you can buy three packages of select Designer Series Paper, and get one FREE! See the full details on my Stampin’ Up! Promotions Page.


September 16 – 30 Host Code: EDRVYB3Z

Use this host code when you order and receive a free gift from me!  If your order is over $150, please do not use this code, but you’ll still get the free gift.  The free gift is your choice of any item valued up to $10.00 in the 2018-19 Annual Catalog or in the 2019 Occasions Catalog!  That includes some of the Host Exclusive stamp sets!


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.  Happy Stamping!

  • Visit my online store here
  • See the current Stampin’ Up! clearance rack specials here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my frequent shopper online customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Real Red – 4 1/4″ x 11″, 1/2″ x 2″
  • Coastal Cabana – 3 3/4″ x 5″, 2″ x 5 1/2″, 2 1/2″ x 3″, 1/2″ x 2″
  • Let it Snow DSP – 5 1/2″ x 2 1/4″, 1/2″ x 3 5/8″,
  • Whisper White – 3 5/8″ x 4 7/8″
  • Sparkle Glimmer Paper – 3/4″ x 5 1/2″, 2 1/2″ x 3″

Stampin’ Up! products used in this project:


Stampin’ Up! Snowman Season Christmas Card

Good Morning! Today is the big day – the 2019 Stampin’ Up! Holiday Catalog is finally open for orders! Yay! To celebrate, I made a snowman Christmas card made with the Stampin’ Up! Snowman Season bundle. This includes the Snowman Season Photopolymer stamp set and the Snowman Builder punch. The Snowman Season stamp set is used for cards and tags on the cover of the new catalog.

In addition to it being the first day to order from the new catalog, today is the first day of the popular Buy 3 get 1 Free Designer Series Paper or DSP promotion. The details are on the Stampin’ Up! Promotions page.

Now, on to today’s Snowman Season Christmas card. You can find the supplies used to create this card at the bottom of my post along with the sizes of cardstock used.

I started by adhering the Let it Snow Specialty Designer Series Paper with the trees to a Real mat and then to a Coastal Cabana card base. The DSP has glitter on the pine trees, so pretty! I cut the large circle from the Stitched Shapes dies from Sparkle Glimmer paper and adhered it to the card front.

I made the snowman by stamping it in Memento Tuxedo Black ink on Thick Whisper White cardstock. I then punched it out with the Snowman Builder punch. I colored his nose with a Pumpkin Pie Stamp’ Write marker and added two large and two small coal pieces from the Let it Snow Embellishment kit to his belly. I stamped the top hat in Memento Tuxedo Black ink on Thick Whisper White, punched it out and colored it. I punched the arms in Crumb Cake and attached the red felt gloves from the Let it Snow Embellishment kit.

I stamped the Merry Christmas sentiment from the Stampin’ Up! Snowman Season stamp set in Real Red on a strip of Whisper White cardstock. I die cut the scalloped mat using the scallop die from the Budding Blooms dies on Real Red cardstock and attached the label to it. I attached it to the card with liquid glue and then attached the snowman with dimensionals.

On the inside of the card, I stamped the sentiment from the Stampin’ Up! Snowman Season stamp set in Real Red on a Whisper White panel. I added a strip of DSP to the bottom and added a Real Red mat before adhering it to the inside of the card.

The colors in the Let it Snow DSP are so cheerful and the glitter really makes it special. Coupled with the different snowmen from the Stampin’ Up! Snowman Seasons stamp set, it really makes for happy, whimsical Christmas cards.

My last few cards have been sneak peeks from the new 2019 Stampin’ Up! Holiday Catalog which is open for orders today! If you haven’t received a catalog yet but would like one, visit the Stampin’ Up! Catalogs page to request one and I’ll get it out to you. Thanks for visiting and happy holiday stamping!

Akiko


Buy 3 Get 1 Free Designer Series Paper Sale Is Back – Starting Today!

By popular demand, Stampin’ Up! is bringing back the Designer Series Paper Sale! During September 4–30, you can buy three packages of select Designer Series Paper, and get one FREE! See the full details on my Stampin’ Up! Promotions Page.


September 1 – 15 Host Code: DHYEBG62

Use this host code when you order and receive a free gift from me!  If your order is over $150, please do not use this code, but you’ll still get the free gift.  The free gift is your choice of any item valued up to $10.00 in the 2018-19 Annual Catalog or in the 2019 Occasions Catalog!  That includes some of the Host Exclusive stamp sets!


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Now button on the right side of the screen to go directly to my online store or contact me if you have any questions.  Happy Stamping!

  • Visit my online store here
  • See the current Stampin’ Up! clearance rack specials here
  • Earn FREE Stampin’ Up! products through my Wildflower Frequent Shopper Program – my way of saying thank you to my frequent shopper online customers.
  • Have any questions? I’d be happy to help, click here to contact me.

Cardstock Cuts for this project:

  • Coastal Cabana – 5 1/2″ x 8 1/2″
  • Real Red – (2) 3 3/4″ x 5″, 1″ x 3 1/4″
  • Thick Whisper White – 4″ x 2″
  • Whisper White – 3 5/8″ x 4 7/8″, 5/8″ x 3 1/4″
  • Sparkle Glimmer Paper – 3 1/4″ x 3 1/4″
  • Let it Snow Specialty DSP – 3 5/8″ x 4 7/8″, 1/2″ x 3 5/8″
  • Crumb Cake – 1″ x 2″

Stampin’ Up! products used in this project: